DRICORE® SMARTWALL®
All the benefits of DRICORE SMARTWALL allows the average DIY’er to finish their basement faster, with more convenience and higher-quality than the professionals
Features & Benefits
- All-in-one DRICORE SMARTWALL panel is 3x faster to install than traditional framing, insulation and drywalling
- Consistent, longer-lasting and higher quality finish
- 29% more energy efficient than traditional framing rated at R-15.1
- Protects against moisture entering the home
- Leaves less mess during install with 75% less mudding and sanding when installing with DRICORE
-
Panel 1 – Blank Panel: The main panel for general use
-
Panel 2 – Electrical Box at Receptacle Height: Designed for standard outlet installations
-
Panel 3 – Electrical Box at Switch or Counter Height: Ideal for light switches or counter-level outlets
- Patch Pro
- Slimmer profile to maximize space
- Backed by industry certifications
Product Overview
DRICORE SMARTWALL provides a consistent, longer-lasting and higher quality finished basement. The patented all-in-one modular wall system maintains strict production requirements on the insulation, OSB, and drywall. The edge of the panels are micro-beveled producing seams that are almost invisible to the eye. The engineered tongue & groove design is less susceptible to warping and DRICORE SMARTWALL uses only 1/10th of the screws to install compared to traditional framing, which results in less potential screw pops. Plus, the slimmer profile maximizes your living space.
DRICORE SMARTWALL is an engineered all-in-one panel that is 70% faster to install than traditional framing. The panels include Easy Wire Channels, making running electrical wires a breeze, and the Tapeless Joint Technology requires a minimum amount of mudding. DRICORE SMARTWALL is 29% more energy efficient than traditional framing as it contains encapsulated framing and high-density EPS foam insulation. The panels also contain Vapour Shield Technology to protect against moisure and inorganic EPS foam which is less susceptible to mold and mildew growth.
There are three different panels to choose from. Panel 1 is the main blank panel for general use. Panel 2 includes an electrical box at standard receptacle height, while Panel 3 features an electrical box positioned for light switches or counter-level outlets.
Finally, DRICORE SMARTWALL reduces the mess that comes with finishing a basement. DRICORE PatchPro compound requires 75% less mudding than traditional framing, resulting in less sanding. Being an all-in-one product reduces the amount of cut-offs or scraps.
Features and Benefits
Micro-Beveled Edges
Unique micro beveled edges eliminate the need for traditional taping, saving you time and the headache of excess dust, caused by significant sanding.
The specialized DRICORE® PatchPro compound is specifically formulated for less dust.
Integrated Vertical & Horizontal Wiring Channels
Easy Wire Channels designed into every panel allows for simple electrical wiring.
High-Density Graphite Infused EPS Insulation
DRICORE SMARTWALL® includes rigid expanded polystyrene (EPS) foam insulation that has been infused with graphite. Graphite reflects and absorbs radiant energy, helping to further increase its R-Value as temperatures drop.
Tongue & Groove Interlocking System
Tongue and groove system makes installation easy while increasing its insulation strength by encapsulating the frame to proving an R-value of 17.4.
Vapour Shield TechnologyTM
Vapour Shield Technology introduces expanded polystyrene (EPS) integrated into DRICORE SMARTWALL® panels to eliminate all air pockets, acting as its own vapour barrier
Encapsulated Framing
Virtually illuminate thermal bridging, by encapsulating the framing in each panel within the ridged EPS insulation.
Accreditation
DRICORE SMARTWALL® has been tested to the fullest lengths possible, and is backed by the industry’s highest standards of approval. DRICORE SMARTWALL® meets the requirements of the National Building Code of Canada, Canadian Construction Materials Centre, and the International Residential Code (IRC) in the United States.
USA
CANADA
Technical Specifications
| Size | Width – 21.75” / Height – 96” |
| Weight | 30 lbs. for 96” Panel |
| Thermal Resistance | R 15.1 (Tested in accordance to ASTM C1363-11) |
| Vapour Permeance | 26 ng/PaSm² (Tested in accordance to ASTM E96/E96M-10) |
| Flame Spread | Flame Spread = 4.9, Smoke Development = 10.8 (Tested in accordance to CAN/ULC-S102-10) |
| Sound Transmission | STC 27 (Tested in accordance to ASTM E90-2009) |
| Electrical | Evaluation by QAI (Quality Auditing Institute) QAI Listing Number “E10540” Conforms to CSA C22.2 No. 203 & UL 962 |
| Building Code Approvals | USA ICC – Report ESR-3790 |
DRICORE SMARTWALL® vs Traditional Build
| Product | Traditional | SMARTWALL® |
|---|---|---|
| Framing | Required | INCLUDED |
| Insulation | Required | INCLUDED |
| Vapour Barrier | Required | INCLUDED |
| Drywall | Required | INCLUDED |
| Electrical Channels | Not Included | INCLUDED |
| Taping & Mudding | Required | NO TAPING REQUIRED |
| Sanding | Required | MINIMAL SANDING REQUIRED |
Install Instructions
How to Install DRICORE SMARTWALL®
Accessories and Tools
DRICORE® PatchPro
Patching compound specifically designed to easily fill
joints and seams on DRICORE SMARTWALL®
Tools Required
- 2” and 6” Drywall trowels
- Handsaw
- Drill and associated drills bits
- Two saw horses or stands
- Chalk line and plumb line
- Level
- Tape measure
- 4” Hole saw (if needed)
- Safety equipment (safety shoes, glasses, gloves)
Project Calculator
Enter Square Footage
Formula
Linear Feet / 1.8 = Number of Total Panels
Types of Panels: Standard, Outlet, Light Switch
– Panels × 0.75 = Standard Panels
– Panels × 0.25 = Outlet Panels
– Lightswitch panels as needed
Add-ons:
– 1qt PatchPro per 10 SMARTWALL Panels
– 2 × 5″ Screws per Panel
Frequently Asked Questions
Yes, you can cut DRICORE SMARTWALL® panels down, always remember to cut from the top. This will ensure that the channels align properly during install as their heights are measured from the bottom of the panel.
Water vapour is water in its gaseous state, instead of liquid or solid (ice). Water vapour is invisible. In a home, water vapour is harmless, it is when it condenses and forms water that it can become a problem.
In order to help prevent water build up within your walls, DRICORE SMARTWALL® has Vapour Shield Technology (VST) built into every panel. By using expanded polystyrene (EPS) foam, each DRICORE SMARTWALL® panel is factory bonded together to eliminate most air pockets. By eliminating air pockets, which is where water vapour tends to condense, it allows the vapour to remain in its gaseous state, therefore reducing the possibility of water from forming within the wall cavity. This greatly reduces the chance for mold, mildew and rot.
- DRICORE SMARTWALL®
- Concrete Foundation
- Vapour Drive
- Rain Water
- Soil
Traditionally framed wood walls lose up to 30% of their insulating capabilities due to an effect called “Thermal Bridging”. Thermal bridging occurs when a conductive material (e.g. wood, aluminum, steel, concrete, etc.) provides a path for heat to flow around insulation. The bypassing “bridging” of the less conductive material significantly reduces its effectiveness as an insulator. This is why many traditionally built walls have cold spots.
DRICORE SMARTWALL® virtually eliminates this “thermal bridge” by effectively encapsulating the framing in each panel within the rigid EPS insulation. This makes DRICORE SMARTWALL® an energy efficient product that you can use to finish your basement.
The “effective” R-value of DRICORE SMARTWALL® is R17. To obtain the same “effective” R-value from a traditionally built wall using 2x6’s, a R24 batt insulation would need to be installed – that is a 29% loss in efficiency. The encapsulated framing also features a tongue and groove design which allow the panels to join together to form a complete wall.
The “effective” R-value of DRICORE SMARTWALL® is R17. To obtain the same “effective” R-value from a traditionally built wall using 2x6’s, a R24 batt insulation would need to be installed – that is a 29% loss in efficiency. The encapsulated framing also features a tongue and groove design which allow the panels to join together to form a complete wall.
Each DRICORE SMARTWALL® panel incorporates a patented “micro bevel” edge, which eliminates the traditional taping stage of finishing the drywall surface. The micro bevel also means that 75% less compound will be used, compared to traditional finishing methods. This results in far less sanding and dust. DRICORE SMARTWALL® has been designed to work only with a specially formulated low-dust compound called DRICORE PATCH PRO®. The combination of the DRICORE SMARTWALL® micro bevel edge and PATCH PRO is what enables the joints to be tapeless.
When installing DRICORE SMARTWALL® panels over existing floor surfaces, the existing floor surface must be clean, structurally sound, and free of debris or materials that may impair the performance of the panels. The existing floor surface must also be free of materials that may trap, block or absorb moisture, or promote mold growth. Some vinyl glues are known to mold when installed directly to concrete. It is recommended to remove any residue or debris, and clean the concrete surface thoroughly, before installing any flooring materials.
For asbestos tile, please check the Environmental Protection Agency or Environment Canada for specific removal, repair and handling recommendations.
DRICORE SMARTWALL® is an easy and fast way to finish your basement walls. The all-in-one engineered wall panel requires fewer steps, less time and less labour to finish your basement. Get the job done 5x faster using DRICORE SMARTWALL®.
The DRICORE SMARTWALL® installation guide and brochure can be found within this product page.
DRICORE SMARTWALL® panels weigh just 30 lbs., are conveniently sized (21.75″ x 96′) and are easy to cut with regular power tools. The panels simply attach to the top of your floor joists and at the bottom to your subfloor using 2″ x 2″ lumber as your tracks.
Unlike conventional construction methods, DRICORE SMARTWALL® OSB framing, insulation, and primed drywall skin, combine into an all-in-one high performance wall assembly. Simply lock panels together to form your finished basement walls.
DRICORE SMARTWALL® panels come with micro beveled edges, which eliminates the need for taping seams. To achieve that perfect seamless finish simply use DRICORE® Patch Pro. DRICORE® Patch Pro is easy to apply, paintable, and crack resistant – this will ensure that your new walls look great for years to come.
- Safety Shoes
- Hand saw
- Level and Tape Measure
- Scissors
- Safety glasses.
- Drill and screw driving bit
- Chalk line and plumb line
- 4″ Hole saw (if needed)
- Two saw horses or stands
- 2″ and 6″ Drywall Trowels
Electrical installation is simplified with integrated vertical and horizontal wiring channels that run through the insulation.
DRICORE® SMARTWALL® is designed to be installed against existing walls as part of a finished basement wall system. It is not intended to be used as a freestanding wall anchored only to the floor and ceiling.